Aves Apoxie Sculpt – Modelling Compound – Primary Colour/Color Kit 184g

£29.95 Inc VAT

Apoxie Sculpt adheres to nearly any surface and is great for sculpting, embellishing, bonding and filling almost anything. It accepts paints, stains, mica powders and much more for a variety of finishing options. It works well with texture stamps, moulds, paints, stains, mica powders and more for additional creative styles. Its smooth, putty-like consistency is easy to mix and use. Self-hardening means no baking and it cures hard in 24 hours to a semi-gloss finish.

Out of stock

SKU: AVPRIMARY
Category:
Brand:

Description

Apoxie Sculpt combines the benefits of sculpting clay with the adhesive power of epoxy.

These colour kits are simply the pre-coloured Apoxie Sculpt sold at a great price for 4 colours in a kit.

Apoxie Sculpt adheres to nearly any surface and is great for sculpting, embellishing, bonding and filling almost anything. It accepts paints, stains, mica powders and much more for a variety of finishing options. It works well with texture stamps, moulds, paints, stains, mica powders and more for additional creative styles. Its smooth, putty-like consistency is easy to mix and use. Self-hardening means no baking and it cures hard in 24 hours to a semi-gloss finish.

Discover unlimited uses!

  • Superior Detail
  • 1-3 hour working time
  • Self Hardening
  • 0% Shrinkage & Cracking
  • Exterior Quality
  • Permanent Semi-gloss finish
  • Waterproof
  • Sulphur Free
  • Marine & Outdoor Quality

There are 3 kits to try with12 colours – mix and match – try them all.

PRIMARY KIT: Red – Yellow – Blue – Green   0.4lb/184g

Directions:

  1. Wear disposable gloves to measure equal parts of A & B. Always retrieve parts A & B with different tools.
  2. Mix & knead together for 2 minutes until thoroughly combined and a uniform colour is achieved. Note incomplete mixing will give poor results. *Allow mixed product to rest 5 minutes for better handling.
  3. Apoxie® Sculpt is ready to use; working time is 1- 3 hours. Shape as desired. Smooth or texture with a wet finger, brush, Q-tip or sculpting tool. Self-hardens (NO?BAKING); 24 hour full cure.
  4. Clean up: soap & water or Aves® Safety Solvent (very helpful for smoothing, removing finger prints & cleaning up pigment / product residue before set-up). Finish as desired. Paint wet or dry. ?Marine & Exterior Quality!

Safe Handling:

  • Wear protective gloves [e.g., nitrile or equivalent] when combining parts A and B.
  • Wear a dust mask and safety glasses when sanding cured product.
  • Keep out of reach of children.
  • Safe for adults when used as directed.
  • 24 hr. full cure required for hard finishing purposes such as sanding, carving, drilling, machining, etc., without chipping, cracking or flaking.
  • Keep containers sealed when not in use.
  • Freeze-Thaw-Stable.

Working Time – A Guide:

  • 1/2 hour: Sticky & most adhesive
  • 1 to 2 hours: Easy to work with
  • 2 to 3 hours: Setting up, form-able detail
  • 24 hours: Hard, cured & waterproof

There are 12 different colours of Apoxie® Sculpt that you can mix & match plus a Super White Apoxie® for more colour blending options.

WARNING – May cause an allergic skin reaction and eye irritation. Hazard Statements – H317 May cause an allergic skin reaction. H320 Causes eye irritation. Apoxie® Sculpt Conforms to Safety Standard ASTM International D4236.

Apoxie Sculpt is GHS & Prop 65 Compliant.

Reviews

There are no reviews yet.

Be the first to review “Aves Apoxie Sculpt – Modelling Compound – Primary Colour/Color Kit 184g”

You may also like…